Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (1997)
Power Steering Line/Hose: Service and Repair
REMOVAL
1. Drain power steering fluid.
2. Remove front bumper.
3. Follow removal steps outlined in illustration.
NOTE: Removal service points as follows:
a. Brake fluid reservoir assembly removal (1).
Disconnect the brake fluid level sensor connector and remove the brake fluid reservoir assembly from the dash panel with the hose still
attached.
NOTE: Place the removed reservoir assembly in a place where it will not be a hindrance when removing and installing the power steering
gear box, and tie it with a cord.
b. Clutch fluid reservoir assembly removal (2).
Remove the clutch fluid reservoir assembly from the dash panel with the hose still attached.
NOTE: Place the removed reservoir assembly in a place where it will not be a hindrance when removing and installing the power steering
hoses, and tie it with a cord.
