Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
STEP 12. Check the harness wires between multi-center display connector C-09 and Ignition switch (IG1).
NOTE: After checking joint connector C-78 and junction block connector C-101 and C-104, check the wires. If joint connector C-78 and junction block
connector C-101 and C-104 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Is the harness wires between multi-center display connector C-09 and ignition switch (IG1) in good condition?
YES: There is no action to be taken.
NO: Repair them. The multi-center display should work normally.
Inspection Procedure 2
Compass Is Not Displayed
