mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Chart|Page 4889 > < Symptom Chart|Page 4887
Page 9
background image

If the compass is only not displayed on the multi-center display, the cause may be a malfunction of the compass-ECU.

TROUBLESHOOTING HINTS

-

Malfunction of the compass-ECU

-

Damaged harness wires and connectors

DIAGNOSIS

Required Special Tool:

-

MB991223: Harness Set

STEP 1. Check the compass-ECU connector C-38 and compass sensor connector D-23 for damage.

Q: Are the compass-ECU connector C-38 and compass sensor D-23 in good condition?

YES: Go to Step 2.

NO: Repair or replace it. Refer to Harness Connector Inspection.

Symptom Chart|Page 4889 > < Symptom Chart|Page 4887