mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Body - Convertible Top Latch Replacement|Page 5314 > < Body - Convertible Top Latch Replacement
Page 2
background image

^

Remove 11 number one bow garnish attaching screws (Torx 15)

^

Remove headliner corner screws (Torx 15)

^

Carefully pry off the front rail weatherstrip push pins (2 per side).

NOTE:

If the push pin is damaged, replace ii during reassembly with a new pushpin listed in the PARTS INFORMATION section of this bulletin.

d.

Open the convertible top to the half-open (vertical) position. Lock the latches. Then remove the number one bow garnish.

e.

Remove the two top cover corner mounting screws (Torx 15).

Then peel back a few inches of the top cover from the number one bow.

f.

Close the convertible top assembly.

Body - Convertible Top Latch Replacement|Page 5314 > < Body - Convertible Top Latch Replacement