Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
3.
Loop the mated connector under the capacitor. Insert the jumper harness into the opening in the carpet and then slide it under the carpeting as
shown.
4.
Allow the jumper harness to protrude a few inches through the carpet opening as shown.
5.
Connect the new jumper harness connector to the power seat switch connector.
6.
Check for proper operation of the power seat. Make sure that there is no interference between the jumper harness and the seat frame when the seat
is moving. Verity that there is no speaker noise when the seat is moving.
PARTS INFORMATION
Part Number
Description
MR588147
Jumper Harness with capacitor
