Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
Brake Master Cylinder: Testing and Inspection
MASTER CYLINDER FUNCTION CHECK
1. Remove the reservoir cap and diaphragm.
2. While watching the open reservoir from a distance of 50 cm (20 inches), have an assistant depress the brake pedal. If there was a stream of brake
fluid rising from the reservoir, proceed to Step 3. If there was no stream of brake fluid rising from the reservoir, repair or replace the master
cylinder.
3. While watching the open reservoir from a distance of 50 cm (20 inches), have the assistant release the brake pedal. If there was a small amount of
air bubbles rising through the brake fluid, master cylinder function is normal. If there were no bubbles rising through the brake fluid, repair or
replace the master cylinder.
