Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
Temperature Sensor (Gauge): Testing and Inspection
ENGINE COOLANT TEMPERATURE GAUGE UNIT CHECK
1. Drain the engine coolant.
2. Remove the engine coolant temperature gauge unit.
3. Immerse the unit in 70 °C (150 °F) water to measure the resistance.
Standard value: 104 ± 13.5 ohms
4. If within the standard value, the sensor is OK. Reinstall it, then check the engine coolant temperature gauge. If not within the standard value,
replace it.
5. After checking, apply the 3M(TM) AAD Part No.8731 or equivalent around the threads of the engine coolant temperature gauge unit.
6. Add engine coolant.
