mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Chart|Page 5652 > < Symptom Chart|Page 5650
Page 16
background image

CIRCUIT OPERATION

Vehicle speed sensor signal is sent to multi-center display.

TECHNICAL DESCRIPTION (COMMENT)

Outside temperature and compass display on multi-center display won't be updated until vehicle speed gets 6.2 mph (10 km/h) or more.

TROUBLESHOOTING HINTS

-

Malfunction of the vehicles speed sensor.

-

Malfunction of the multi-center display.

-

Damaged harness wires and connectors

DIAGNOSIS

STEP 1. Check the speedometer

Q: Is the speedometer in good condition?

YES: Go to Step 2.

NO: Refer to Combination Meter - Troubleshooting under Instrument Panel/Testing.

STEP 2. Check the connector between vehicles speed sensor connector B-39 and multi-center display connector C-09 for damage.

Q: Are the vehicles speed sensor connector B-39 and multi-center display connector C-09 in good condition?

YES: Go to Step 3.

NO: Repair or replace it. Refer to Harness Connector Inspection.

Symptom Chart|Page 5652 > < Symptom Chart|Page 5650