Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
STEP 8. Check the sunroof motor assembly connector D-06 for damage.
Q: Is sunroof motor assembly connector D-06 in good condition?
YES: Go to Step 9.
NO: Repair or replace it. Refer to Harness Connector Inspection. The sunroof should work normally.
STEP 9. Check the harness wires between sunroof motor assembly connector D-06 and ignition switch (IG2).
NOTE: After checking intermediate connector C-31 joint connector C-77, junction block connector C-101 and C-107, check the wires. If intermediate
connector C-31, joint connector C-77, junction block connector C-101 and C-107 are damaged, repair or replace them. Refer to Harness Connector
Inspection.
Q: Are the harness wires between sunroof motor assembly connector D-06 and ignition switch (IG2) in good condition?
YES: There is no action to be taken.
NO: Repair or replace them. The sunroof should work normally.
