mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2134 > < Initial Inspection and Diagnostic Overview|Page 2132
Page 75
background image

STEP 5. Check the rear wiper motor connector F-07 and ETACS-ECU connector C-114 for damage.

Q: Are rear wiper motor connector F-07 and ETACS-ECU connector C-114 in good condition?

YES: Go to Step 6.

NO: Repair or replace them. Refer to Harness Connector Inspection. The rear wiper should work normally.

STEP 6. Check the harness wires between rear wiper motor connector F-07 and ETACS-ECU connector C-114.

Initial Inspection and Diagnostic Overview|Page 2134 > < Initial Inspection and Diagnostic Overview|Page 2132