mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2184 > < Initial Inspection and Diagnostic Overview|Page 2182
Page 125
background image

STEP 7. Check the harness wire between fog light relay connector A-06X and battery.

Q: Is the harness wire between fog light relay connector A-06X and battery In good condition?

YES: There is no action to be taken.

NO: Repair it. The fog lights should illuminate normally.

STEP 8. Check fog light relay connector A-06X and front-ECU connector A-09X for damage.

Q: Are fog light relay connector A-06X and front-ECU connector A-09X in good condition?

YES: Go to Step 9.

NO: Repair or replace them. Refer to Harness Connector Inspection. The fog lights should illuminate normally.

STEP 9. Check the harness wire between fog light relay connector A-06X and front-ECU connector A-09X.

Q: Is the harness wire between fog light relay connector A-06X and front-ECU connector A-09X in good condition?

YES: Go to Step 10.

NO: Repair it. The fog lights should illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2184 > < Initial Inspection and Diagnostic Overview|Page 2182