mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2204 > < Initial Inspection and Diagnostic Overview|Page 2202
Page 145
background image

STEP 8. Check the harness wires between theft-alarm horn relay connector A-11X and ETACS-ECU connector C-112.

NOTE:  After checking intermediate connector C-89, check the wires. If intermediate connector C-89 is damaged, repair or replace it. Refer to Harness
Connector Inspection

Q: Are the harness wires between theft-alarm horn relay connector A-11X and ETACS-ECU connector C-112 in good condition?

YES: Go to Step 9.

NO: Repair them. The horn should sound when the theft-alarm system is triggered.

STEP 9. Check the theft-alarm horn relay connector A-11X and theft-alarm horn connector A-25 for damage.

Q: Are theft-alarm horn relay connector A-11X and theft-alarm horn connector A-25 in good condition?

YES: Go to Step 10.

NO: Repair or replace them. Refer to Harness Connector Inspection. The horn should sound when the theft-alarm system is triggered.

Initial Inspection and Diagnostic Overview|Page 2204 > < Initial Inspection and Diagnostic Overview|Page 2202