Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
STEP 4. Check driver's door switch connector D-11 and ETACS-ECU connector C-114 for damage.
Q: Are driver's door switch connector D-11 and ETACS-ECU connector C-114 In good condition?
YES: Go to Step 5.
NO: Repair or replace them. Refer to Harness Connector Inspection. The driver's door switch input signal should be able to be checked and the
functions, which are described in the "Technical Description (comment)," should work normally.
STEP 5. Check the harness wires between driver's door switch connector D-11 and ETACS-ECU connector C-114.
NOTE: After checking junction block connector C-113, check the wires. If junction block connector C-113 are damaged, repair or replace it. Refer to
Harness Connector Inspection.
Q: Is the harness wires between the driver's door switch connector D-11 and ETACS-ECU connector C-114 in good condition?
YES: Replace the ETACS-ECU. The driver's door switch input signal should be able to be checked and the functions, which are described in the
"Technical Description (comment)," should work normally.
NO: Repair them. The driver's door switch input signal should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
