Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
STEP 1. Check the windshield intermittent wiper interval adjusting knob and column switch body.
Check the resistance at terminal numbers 27 and 28. The resistance should change smoothly from approximately 0 ohm ("FAST" position) to
approximately 1 kohm ("SLOW" position).
Q: Is the windshield intermittent wiper interval adjusting knob in good condition?
YES: Go to Step 2.
NO: Replace the it. Check that the input signal from the windshield intermittent wiper interval adjusting knob can be checked and the wiper interval
can be adjusted.
STEP 2. Check column switch connector C-86 and ETACS-ECU connector C-111 for damage.
Q: Is column switch connector C-86 and ETACS-ECU connector C-111 in good condition?
YES: Go to Step 3.
NO: Repair or replace them. Refer to Harness Connector Inspection. Check that the input signal from the windshield intermittent wiper interval
adjusting knob can be checked and the wiper interval can be adjusted.
