Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
Ignition Control Module: Testing and Inspection
IGNITION COIL AND IGNITION POWER TRANSISTOR
Required Special Tool:
MB991348: Test Harness Set
Measurement Method
1. Disconnect the connector, and connect test harness special tool, (MB991348), in between. (All terminals should be connected.)
2. Connect the oscilloscope probe to ignition coil connector terminal 3.
Alternate method (Test harness not available)
1. Connect the oscilloscope probe to ECM <M/T> or PCM <A/T> terminal 11.
Standard Wave Pattern