Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
[C] STEERING WHEEL REMOVAL
CAUTION:Do not hammer on the steering wheel. Doing so may damage the collapsible column mechanism.
[D] CLOCK SPRING REMOVAL
WARNING: The removed clock spring should be stored in a clean, dry place.
INSTALLATION SERVICE POINTS
]A[ PRE-INSTALLATION INSPECTION
WARNING: Dispose of air bag modules only according to the specified procedure.
1. When installing the new air bag modules and clock spring, refer to "INSPECTION."
2. Connect the negative (-) battery cable.
CAUTION:To prevent damage to scan tool MB991502, always turn the ignition, switch to "LOCK" (OFF) position before connecting or
disconnecting scan tool MB991502.
3. Connect scan tool MB991502 to the data link connector.
4. Turn the ignition switch to "ON" position.
5. Conduct diagnostic test using scan tool MB991502 to ensure entire SRS operates properly.
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
6. Turn the ignition switch to "LOCK" (OFF) position. Disconnect the negative (-) battery cable and tape the terminal to prevent accidental
connection and air bags deployment.
]B[ CLOCK SPRING INSTALLATION