Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
Side impact sensor
1. Check that there is no bending or corrosion in the center pillar.
2. Check that there is no denting, breakage or bending of the side impact sensor.
3. Check that there is no clamping of the harness, connector damage or bent terminals.
NOTE: The illustration shows the side impact sensor (LH). The position of the side impact sensor (RH) is symmetrical to this.
Steering wheel, steering column and intermediate joint
1. Check the wiring harness (built into the steering wheel) and the connectors for damage, and the terminals for deformation.
2. Install the air bag module to check fit or alignment with the steering wheel.
3. Check the steering wheel for noise, binding or difficult operation and excessive free play.
Harness connector (floor wiring harness)
Check the harnesses for binding, the connectors for damage, poor connection, and the terminals for deformation.
