Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
6. Install the metal cover securely to housing.
2. Drum and regulator wire installation procedure
1. Place the drum, guide and regulator on a work bench as shown in the illustration.
a. Place the drum so that the square hole is facing upward.
b. Place the guide so that the slits are facing upward.
c. Place the regulator so that the glass bracket is facing downward. Position the glass bracket so that glass is in the fully-open position.
2. Pass the springs over the wires, and then install the lowering wire to the guide first, followed by the lifting wire. (The lifting wire should be on
top of the lowering wire.)
