Eclipse Spyder GT V6-3.0L SOHC (2002)
STEP 5. Check fog light switch connector C-76 and ETACS-ECU connector C-118 for damage.
Q: Are fog light switch connector C-76 and ETACS-ECU connector C-118 in good condition?
YES: Go to Step 6.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the for light switch operates normally, it indicates that a correct signal
is sent from the fog light switch.
STEP 6. Check the wiring harness between fog light switch connector C-76 and ETACS-ECU connector C-118.
Q: Is the wiring harness between fog light switch connector C-76 and ETACS-ECU connector C-118 in good condition?
YES: Replace the ETACS-ECU. If the for light switch operates normally, it indicates that a correct signal is sent from the fog light switch.
NO: Repair the wiring harness. If the for light switch operates normally, it indicates that a correct signal is sent from the fog light switch.
Inspection Procedure O-4
ETACS-ECU does not Receive "R" Position Signal from the Backup Light Switch <M/T>