mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2415 > < Initial Inspection and Diagnostic Overview|Page 2413
Page 383
background image

STEP 6. Check rear wiper motor connector F-07 and ETACS-ECU connector C-119 for damage.

Q: Are rear wiper motor connector F-07 and ETACS-ECU connector C-119 in good condition?

YES: Go to Step 7.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the rear wiper operates normally, it indicates that a correct auto-stop
signal is sent from the rear wiper motor.

Initial Inspection and Diagnostic Overview|Page 2415 > < Initial Inspection and Diagnostic Overview|Page 2413