Endeavor V6-3.8L SOHC (2004)
Align the steering joint cover notch (arrow A) with the steering gear lug (arrow B), and install the front axle number 1 crossmember, the rear roll
stopper and steering gear assembly.
>>D<< FRONT AXLE NO.1 CROSSMEMBER STAY/SELF-LOCKING NUT INSTALLATION
CAUTION: Before installing the front crossmember stay, ensure that the crossmember mounting bolts have been tightened to 160 - 200 Nm (119
- 147 ft. lbs.).
Ensure that the crossmember mounting bolts have been tightened to 160 - 200 Nm (119 - 147 ft. lbs.), and then install the front crossmember stay
with the self-locking nut.
INSPECTION
^
Check the crossmembers for cracks or damage.