Endeavor V6-3.8L SOHC (2004)
^
Do not turn the hydraulic unit upside down or lay it on its side.
Remove the hydraulic unit as shown, taking care not to damage surrounding components such as the flexible suction hose.
INSTALLATION SERVICE POINT
>>A<< BRAKE TUBE CONNECTION
Connect the tubes to the hydraulic unit assembly as shown in the illustration.
1. To the front brake (LH)
2. To the rear brake (RH)
3. To the rear brake (LH)
4. To the front brake (RH)
5. From the master cylinder (secondary)
6. From the master cylinder (primary)
