Endeavor V6-3.8L SOHC (2004)
2. The multi-center display performs check and displays the check result. Operate the lighting switch or the ignition switch. Check whether the
multi-center display screen corresponds to that operation.
Auto check
1. Activate the service mode start-up screen.
2. Turn the ignition switch to "ON" position.
3. Choose "Auto check" by pressing function button switch 2.
4. Execute "ENTER" by pressing the function button switch 3.
5. The multi-center display unit checks the communication condition, and then shows the check results of "Communication check", "Monitor check",
"Compass check", and "Vehicle check". Then the multi-center display ceases CAN communication in approximately seven seconds.
Release of service mode
Move from the check result screen to the service mode start-up screen by pressing "ENTER" above function button switch 3. If you press "BACK"
above function button switch 1 during processing, the checks will be cancelled and the screen returns to service mode start-up screen.
Fail-safe function of the multi-center display unit (middle grade type)
If abnormal power supply voltage or abnormally high temperature is detected in the multi-center display unit (middle grade type), a fail-safe function will
be activated to protect the unit, and then blank the screen.
Fail-safe function is activated when:
Power supply voltage is abnormal
-
Excessively low voltage: Power supply voltage remains 9 volts or less for approximately 10 seconds.
-
Excessively high voltage: Power supply voltage remains 17 volts or more for approximately 10 seconds.
Abnormally high temperature is detected in the unit.
-
Internal temperature remains 95 °C (203 °F) for 60 seconds.
