Endeavor V6-3.8L SOHC (2004)
Q: Is multi-center display unit (middle grade type) connector C-06 in good condition?
YES : Go to Step 6.
NO : Repair or replace the connector. Refer to Harness Connector Inspection. The multi-center display unit (middle grade type) should work
normally.
STEP 6. Check the wiring harness between C-06 (terminal 1) and battery.
NOTE: Also check intermediate connector C-31 and joint connector (1) C-04 for loose, corroded, or damaged terminals, or terminals pushed back in
the connector. If intermediate connector C-31 and joint connector (1) C-04 is damaged, repair or replace the wiring harness. Refer to Harness Connector
Inspection.
Q: Is the wiring harness between C-06 and battery in good condition?
YES : There is no action to be taken.
