Endeavor V6-3.8L SOHC (2004)
NO : Replace radio, CD player and CD changer and then go to step 6.
STEP 6. Retest the system
Confirm that the audio operation screen is displayed normally.
Q: Is the check result satisfactory?
YES : The procedure is complete.
NO : Go to step 1.
Inspection Procedure 7
The Compass can not be Calibrated Manually, or Becomes Out of Calibration Easily. (Middle Grade Type)
TECHNICAL DESCRIPTION (COMMENT)
The compass sensor, which measures the direction of the vehicle, is incorporated in the multi-center display unit (middle grade type). If the direction of
the vehicle is not displayed normally by repeating the manual calibration, the compass sensor may be defective, the vehicle body may have been
magnetized, or the manual calibration is performed in strongly magnetized environment.
TROUBLESHOOTING HINTS
-
The compass sensor in the middle grade type multi-center display unit is defective
-
Magnetization of vehicle body
-
Calibration in magnetized environment (such as factory or a high voltage conductor)
DIAGNOSIS
STEP 1. Check the compass sensor by using a self-diagnostic function.
Start up the service mode to check the compass. See: Initial Inspection and Diagnostic Overview
Q: Is "NG" displayed as the check result for the compass sensor?
YES : Replace multi-center display unit (middle grade type) and then go to step 5.
NO : Go to Step 2.
STEP 2. Confirm if the manual calibration is performed successfully.
1. Park the vehicle on an open space, and confirm that the place is not magnetized strongly.
