Endeavor V6-3.8L SOHC (2004)
Standard value:
8. If not within the standard value, check the tire size. If an incorrect size of tire is used, replace it and check again. If the tire size is correct, a defect
may be present in components and circuit between the output shaft speed sensor and the combination meter. Check the following items.
-
output shaft speed sensor
-
combination meter (refer to INSPECTION PROCEDURE 6: Speedometer does not Work). See: Instrument Cluster / Carrier/Testing and
Inspection/Symptom Related Diagnostic Procedures/Symptom Diagnostic Procedures/Inspection Procedure 6
