Endeavor V6-3.8L SOHC (2004)
Fuel Level Sensor: Service and Repair
FUEL LEVEL SENSOR REPLACEMENT
1. Remove the right rear seat cushion mounting bolts, and lift the right rear seat cushion and tie it to the head restraint.
2. Cut the floor mat and then remove the service hole cover to gain access to the service hole.
NOTE: Push the floor mat to find the notches and cut the floor mat along them.
3. Disconnect the fuel level sensor (sub) connector.
CAUTION: When withdrawing the fuel level sensor (sub) from the fuel tank, be careful not damage the sensor unit and the float.