Endeavor V6-3.8L SOHC (2004)
Seat Belt Control Module: Service and Repair
SRS CONTROL UNIT (SRS-ECU)
REMOVAL AND INSTALLATION
WARNING:
-
Never attempt to disassemble or repair the SRS-ECU. If faulty, replace it.
-
Do not drop or subject the SRS-ECU to impact or vibration. If denting, cracking, deformation, or rust are discovered in the SRS-ECU,
replace it with a new SRS-ECU.
-
After deployment of an air bag, replace the SRS-ECU with a new one.
-
Never use an ohmmeter on or near the SRS-ECU, and use only the special test equipment described in Restraint Systems/Air Bag
Systems/Tools and Equipment/Test Equipment.
REMOVAL SERVICE POINT
[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION