Endeavor V6-3.8L SOHC (2004)
Seat Belt: Testing and Inspection
SEAT BELT WITH PRE-TENSIONER CHECK
WARNING:
-
If any component damage is found during the following inspection, replace the seat belt with pre-tensioner with a new one. Dispose of the
old one according to the specified procedure. (Refer to Air Bag Module And Seat Belt Pre-tensioner Disposal Procedures).
-
Never attempt to measure the circuit resistance of the seat belt pre-tensioner even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental seat belt pre-tensioner operation will result in serious personal injury.
1. Check seat belt pre-tensioner for dents, cracks or deformation.
2. Check the connectors for damage, the terminals for deformation, and the harness for binding.
