Endeavor V6-3.8L SOHC (2004)
Seat Sensor/Switch: Service and Repair
SEAT SLIDE SENSOR <Vehicles with advanced air bag>
REMOVAL AND INSTALLATION
WARNING:
-
Never attempt to disassemble or repair the seat slide sensor. If faulty, replace it.
-
Do not drop or subject the seat slide sensor to impact or vibration. Replace the seat slide sensor, if dents, cracking, deformation, or rust
are present.
REMOVAL SERVICE POINT
[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work. (Refer to SRS Service Precautions).
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
