Endeavor V6-3.8L SOHC (2004)
Impact Sensor: Service and Repair
Side Impact Sensor
SIDE IMPACT SENSOR
REMOVAL AND INSTALLATION
A side impact sensor is installed behind the center pillar trim on both driver and passenger sides of the vehicle.
WARNING:
-
Never attempt to disassemble or repair the side impact sensor. If faulty, replace it.
-
Do not drop or subject the side impact sensor to impact or vibration. Replace the side impact sensor, if dents, cracking, deformation, or
rust are present.
-
Replace the side impact sensor after the air bag has deployed. Pre-removal Operation
-
Turn the ignition key to the "LOCK" (OFF) position.
REMOVAL SERVICE POINT
[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work. (Refer to SRS Service Precautions).
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
