Endeavor V6-3.8L SOHC (2004)
NOTE: Also check intermediate connector C-31 and joint connector C-04 for loose, corroded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector C-31 or joint connector C-04 is damaged, repair or replace it. Refer to Harness Connector Inspection.
Q: Is the wiring harness between combination meter connector C-102 (terminal 1) and the battery in good condition?
YES : Go to Step 8.
NO : Repair the wiring harness. Check to see that all meters operate.
STEP 8. Retest the system.
Q: Is the malfunction eliminated?
YES : The procedure is complete. (If no malfunctions are found in all steps, an intermittent malfunction is suspected. Refer to How to Use
Troubleshooting/Inspection Service Point).
NO : Go to Step 1.
Built After January 2004
The Immobilizer Indicator Light does not Illuminate. <FROM TO JANUARY 2004>
