mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Sensors and Switches - Transmission and Drivetrain > < Tire Pressure Sensor ID Check|Page 849
Page 2
background image

NOTE:  If the TPMS transmitter is not activated, slide the magnet until it is activated. If the TPMS transmitter is still not activated, move the
vehicle (turn the tire) by approximately half a turn of the tire. Then attempt to activate the TPMS transmitter.

10. Check the data on the PC display.
11. After tire pressure sensor check, turn the ignition switch to the"LOCK" (OFF) position.
12. Remove scan tool MB991958.

Sensors and Switches - Transmission and Drivetrain > < Tire Pressure Sensor ID Check|Page 849