Endeavor V6-3.8L SOHC (2004)
Q: Is the wiring harness between combination meter connector C-102 (terminal 19) and immobilizer-ECU connector C-39 (terminal 5) in good
condition?
YES : Go to Step 5.
NO : Repair the wiring harness. Confirm the immobilizer indicator light illuminate normally.
STEP 5. Measure the voltage at combination meter connector C-102 in order to check the battery circuit of power supply system to the
combination meter.
1. Turn the ignition switch to the "LOCK" (OFF) position.
2. Disconnect combination meter connector C-102, and measure at the wiring harness side.
