Endeavor V6-3.8L SOHC (2004)
Control Arm Bushing: Service and Repair
LOWER ARM BUSHING (REAR) REPLACEMENT
Required Special Tools:
^
MB991963: Suspension Bushing Arbor
^
MB990889: Rear Suspension Bushing Ring
^
MB990890: Rear Suspension Bushing Base
Replace the lower arm bushing as follows:
1. Use special tools MB991963 and MB990890 to drive out the lower arm bushing.
2. Position the lower arm bushing so that its projections are as shown, and then use special tools MB991963, MB990889 and MB990890 to press in
the lower arm bushing.
CAUTION: When pressing in the lower arm bushing, take care not to transform the lower arm.
