Endeavor V6-3.8L SOHC (2004)
Quarter Window Glass Moulding / Trim: Customer Interest
Body - Quarter Glass Molding Fading/Peeling
No: TSB-09-42B-001
DATE: October, 2009
MODEL: 2004 - 07 Endeavor<
SUBJECT:
CLEARCOAT FADING/PEELING ON REAR QUARTER GLASS MOLDING
This TSB supercedes TSB-08-42B-001, issued January, 2008, to add 2006 and 2007 Endeavor models. revised information is indicated by <.
PURPOSE
The rear quarter glass molding on some affected vehicles may appear to be fading or peeling. The condition is caused by exposure to UV radiation. This
TSB advises what repairs should be made to the affected areas of the vehicle.
AFFECTED VEHICLES
2004 - 07 Endeavor<
PROCEDURE
Replacement of the rear quarter glass assembly for a cosmetic condition with the painted molding is not required. Have a body shop refinish the molding
according to industry standard practices.
NOTE:
PHOTOS REQUIRED CONDITION (PRC)
REPAIRS RELATING TO THIS CONDITION MUST BE SUBMITTED THROUGH THE (PRC) SYSTEM PRIOR TO THE START OF REPAIRS.
WARRANTY INFORMATION<
This bulletin advises that repair of the cosmetic condition is required and contains no technical information. If an affected vehicle is observed with the
above condition, repair as described in this bulletin and submit a normal warranty claim as follows.
IMPORTANT:
PRC Code is Required for Claim Entry.
Relay Quarter Window Molding
