mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2099 > < Initial Inspection and Diagnostic Overview|Page 2097
Page 201
background image

CAUTION:  The strand end of the twist wire should be within 10 cm (4 inches) from the connector.

Q: Is ASC/TCL-ECU connector A-32 in good condition?

YES : Go to Step 67.

NO : Repair the damaged parts.

STEP 67. Check the CAN_L line (communication line only) between intermediate connector C-31 and ASC/TCL-ECU connector for a short to
the power supply. Measure the voltage at intermediate connector C-31.

CAUTION:

-

A digital multimeter should be used.

-

The test wiring harness should be used.

Initial Inspection and Diagnostic Overview|Page 2099 > < Initial Inspection and Diagnostic Overview|Page 2097