Endeavor 2WD V6-3.8L (6G75) (2008)
/Page-568761.png)
4. Measure the resistance between joint connector (4) terminal 6 and ETACS-ECU connector terminal 73.
OK: 2 ohms or less
5. Measure the resistance between joint connector (4) terminal 17 and ETACS-ECU connector terminal 72.
OK: 2 ohms or less
CAUTION: Strictly observe the specified wiring harness repair procedure.
Q: Do all the resistances measure 2 ohms or less?
YES : [All the resistances measure 2 ohms or less] Power supply to the ETACS-ECU may be suspected. Diagnose the ETACS-ECU by referring
to Simplified Wiring System (SWS), Diagnosis.
NO : [If either of the resistances measures more than 2 ohms or all the resistances measure more than 2 ohms] Repair the wiring harness between
joint connector (4) and the ETACS-ECU connector.
