Endeavor 2WD V6-3.8L (6G75) (2008)
/Page-718002.png)
1. Disconnect the all PCM connectors, and connect check harness special tool (MB991923) between the separated connectors.
2. Connect the oscilloscope probe to each check harness connector terminal to analyze each cylinder:
-
Terminal No. 151 for the number 1 cylinder.
-
Terminal No. 150 for the number 2 cylinder.
-
Terminal No. 144 for the number 3 cylinder.
-
Terminal No. 148 for the number 4 cylinder.
-
Terminal No. 143 for the number 5 cylinder.
-
Terminal No. 134 for the number 6 cylinder.
