Endeavor 2WD V6-3.8L SOHC (2006)
STEP 4. Check the ground circuit to the ETACS-ECU. Measure the resistance at ETACS-ECU connectors C-218 and C-219.
1. Disconnect ETACS-ECU connectors C-218 and C-219, and measure the resistance available at the junction block side of the connector.
2. Measure the resistance value between ETACS-ECU connector C-218 terminal 56 and ground.
-
The resistance should be 2 ohms or less.
Measure the resistance value between ETACS-ECU connector C-219 terminal 3 and ground.
-
The resistance should be 2 ohms or less.
Q: Is the measured resistance 2 ohms or less?
YES: Go to Step 6.
NO: Go to Step 5.