Endeavor 2WD V6-3.8L SOHC (2006)
Remove the rear door lock actuator (RH). The illustration shows when the door lock actuator is viewed from outside the door. Door Handle and Latch.
Q: Does the rear door lock actuator (RH) work normally?
YES: Go to Step 17.
NO: Replace the rear door lock actuator (RH). Verify that all the doors can be locked and unlocked normally.
STEP 17. Check ETACS-ECU connector C-219 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connector C-219 in good condition?
YES: Go to Step 18.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that all the doors can be locked and unlocked
normally.
