Endeavor 2WD V6-3.8L SOHC (2006)
1. Remove front pipe 1 ("Y") pipe.
2. Remove front pipe 2.
3. Replace heat shields.
Torque heat shield clamp bolts to 6.5 +/- 1.5 Nm (58 +/- 13 in. lb.)
4. During reinstallation torque all pipe connections to 49 +/- 4 Nm (37 +/- 2 ft. lb.)
PARTS INFORMATION
WARRANTY INFORMATION
The information contained in this bulletin is subject to change. For the latest version of this document, go to Mitsubishi Dealer Link, MEDIC, or
Mitsubishi Service Information website (www.mitsubishiteckinfo.com).