Endeavor 2WD V6-3.8L SOHC (2006)
1. Disconnect powertrain control module connector B-18 and intermediate connector C-31, and measure the resistance at the male side of
intermediate connector C-31 (at front wiring harness side).
2. Turn the ignition switch to the "LOCK" (OFF) position.
CAUTION: Disconnect the negative battery terminal.
3. Disconnect the negative battery terminal.
4. Measure the resistance between intermediate connector C-31 terminal 12 and body ground.
OK: 1 kOhm or more
CAUTION: Strictly observe the specified wiring harness repair procedure.
Q: Does the resistance measure 1 kOhm or more?