Endeavor 2WD V6-3.8L SOHC (2006)
1. Disconnect intermediate connector C-31, and measure the resistance at the male side (at front wiring harness side).
2. Turn the ignition switch to the "LOCK" (OFF) position.
CAUTION: Disconnect the negative battery terminal.
3. Disconnect the negative battery terminal.
4. Measure the resistance between intermediate connector C-31 terminals 11 and 12.
OK: 120 ± 20 Ohms
Q: Does the resistance measure 120 ± 20 Ohms?
YES: <The resistance measures 120 ± 20 Ohms> Go to Step 3.
NO: <The resistance does not measure 120 ± 20 Ohms> Go to Step 27.
