Endeavor 2WD V6-3.8L SOHC (2006)
-
When removing the fuel pump module from the fuel tank, be careful not to spill the fuel remaining in the fuel pump module.
-
When withdrawing the fuel pump module from the fuel tank, be careful not to damage the module unit and the float.
6. Drain the fuel remaining in the fuel pump module while removing the fuel pump module from the service hole.
7. Disconnect the suction hose and remove the fuel pump module from the fuel tank.
8. Replace the packing with a new one.
CAUTION: When installing the fuel pump module into the fuel tank, be careful not to damage the module unit and the float.
9. Connect the suction hose to the fuel pump module, and install the fuel pump module to the fuel tank whilst ensuring that the suction hose is not
kinked.
10. Install the plate to the fuel tank.
11. Connect the fuel pump module connector, the fuel tank differential pressure sensor connector and fuel high-pressure hose connection.
12. Install the service hole cover.