Endeavor 2WD V6-3.8L SOHC (2006)
Wiper Motor: Testing and Inspection
Rear Wiper Motor Check
REAR WIPER MOTOR CHECK
Inspect the rear wiper motor by removing the harness connector with the motor still installed in the vehicle.
WIPER MOTOR OPERATION
1. Remove the motor cover.
2. Connect the rear wiper motor connector terminal number 1 to the ground.
3. Check to see that the rear wiper motor run, when connecting the positive battery terminal to rear wiper motor connector terminal number 3.
4. Disconnect the positive battery terminal to rear wiper motor connector terminal number 3, when the rear wiper motor running.
5. Check to see that the rear wiper motor stops.
WIPER MOTOR AT STOP POSITION OPERATION
1. Remove the motor cover.
