Expo AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
Fig. 17 Camshaft Bearing Caps Identification
d. Identify bearing caps 2, 3 and 4 as shown in Fig. 17.
e. Install bearing caps with front marks pointing to camshaft sprocket side of engine.
f.
Bleed auto-lash adjuster as outlined under Step 1, then insert adjuster into rocker arm securing with lash adjuster holder, tool No.
MD998443-01, or equivalent.
g. Install camshaft oil seal using seal installation tools, No. MD998306-01 and MD998307-01, or equivalent.
h. Apply sealant to outer circumference of circular packing then install on cylinder head.
