Expo AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
2. Install the auto tensioner.
CAUTION:
-
Do not take out the wire.
"I" TENSIONER PULLEY INSTALLATION
1. Install the tensioner pulley onto the tensioner arm.
2. Locate the pinhole in the tensioner pulley shaft to the left of the center bolt. Then, tighten the center bolt finger-tight.
CAUTION:
-
Do not take out the wire.
"J" TIMING BELT INSTALLATION
1. Align the timing marks of the camshaft sprocket, the crankshaft sprocket, and the oil pump sprocket.
