Expo AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
3. Holding tensioner up, exert tension until tension side of belt is taut, then tighten tensioner bolt, Fig. 36. Do not allow tensioner pulley to rotate
when tightening bolt.
Fig. 37 Balance Shaft Belt Tension Check
4. Apply finger pressure to center of belt's tension side and measure deflection, Fig. 37. Deflection should be 0.20-0.28 inch.
Fig. 38 Crankshaft Flange Installation
5. Install crankshaft flange, Fig. 38, then install crankshaft sprocket and pulley, and tighten crankshaft bolt to specifications.