Expo AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
"A" ENGINE SUPPORT BRACKET INSTALLATION
NOTE: Apply sealant to the bolt shown in the figure and tighten it to the specified torque.
Specified sealant: MITSUBISHI GENUINE PART No. MD970389 or equivalent
"B" CRANKSHAFT SPROCKET "B" INSTALLATION
NOTE: Pay attention to its direction.
"C" SPACER INSTALLATION
1. Apply a thin coat of engine oil to the outer inside diameter of the spacer.
2. Install the spacer with the chamfered end facing the oil seal.
NOTE: If the spacer is installed adversely, the oil seal may be damaged, resulting in the oil leaks.
"D" TIMING BELT "B" INSTALLATION
1. Align the crankshaft sprocket "B" timing mark the counterbalance shaft sprocket timing mark.